Description
Product Code: 75877
Filters up to 150 GPD (gallons per day) of ultra-pure, low PPM water. THERE ARE TWO INDICATIONS AS TO WHEN TO CHANGE YOUR MEMBRANES
1. Test the RO and source/inlet water to see what percentage of the inlet water’s PPM the 150™ is filtering out (rejection %). You should see approximately 98% of the inlet PPM’s being removed when the membrane is new. If the rejection % falls under an acceptable level (typically 90%) it’s time to change the membrane.
2. When the flow rate of the product water slows down significantly. This can also happen if your pre-filters are clogged. If you change your pre-filters and the product water still flows slowly then it’s an indication you need a new membrane.
Detailed description:
– 96% – 99% PPM Rejection – Membrane Type: Thin Film Composite – Maximum Operating Temperature: 113°F (45°C) – Maximum Operating Pressure: 100 PSI – Maximum Feed Flow Rate: 2 GPM – Maximum Feed Water Turbidity: 1 NTU – Maximum Feed Sit Density Index (SDI): 5 SDI – Chlorine Tolerance: <0 PPM – Dimensions (H x W x D): 12″ x 2″ x 2″ – Weight: .5lbs
Reviews
There are no reviews yet.